TX Roofing systems

Four roof systems.One that fits yours.

TPO, EPDM, modified bitumen and hot mop. Each one is built layer by layer, and each one is the right call for a different roof. Here is how they work.

00 At a glance

Same job, four different answers.

System
Made of
Installed
Surface
Strongest at
TPO
Thermoplastic polyolefin, single-ply
Heat-welded seams
Reflective white
Cutting cooling costs
EPDM
Synthetic rubber, single-ply
Fully adhered, fastened or ballasted
Black rubber, few seams
Longevity, 30+ years
Modified bitumen
Polymer-modified asphalt (APP or SBS)
Torch-down, cold adhesive or self-adhering
Granulated cap, colors and cool options
Punctures, tears, foot traffic
Hot mop
Hot asphalt between reinforcing felts
Ply by ply, hot-applied
Gravel or reflective coating
Redundancy, water resistance

Not sure which one your roof needs? That is what the free estimate is for. Ask us.

01 TPO commercial roofing

TPO: the white roof that pays you back.

A single-ply thermoplastic polyolefin membrane made for commercial buildings.

TPO is a single-ply membrane built for commercial roofs. Its white, reflective surface throws heat back at the sun, which cuts cooling costs through an East Texas summer.

Seams are heat-welded, not glued, so the finished roof is one continuous, watertight surface. It is light, resists UV and punctures, and asks for very little maintenance.

The natural fit for flat and low-slope roofs on warehouses, retail centers, offices and industrial buildings.

Best for
Commercial and industrial flat roofs
Seams
Heat-welded
Surface
Reflective white
Upkeep
Minimal
Full TPO commercial roofing page
    Crew unrolling white TPO membrane on a flat roofGloved hand heat-welding a TPO seamLarge white-roofed warehouse seen from aboveOffice building with a clean white membrane roof

    02 EPDM rubber roofing

    EPDM: built to last 30 years and more.

    High-performance synthetic rubber for flat and low-slope roofs.

    EPDM is a synthetic rubber membrane that shrugs off weather, UV and big temperature swings. It goes down in large sheets, so there are fewer seams to go wrong.

    Depending on the building, it can be fully adhered, mechanically fastened or ballasted. With a proven lifespan of 30+ years and very little upkeep, it is a cost-effective way to protect a property for the long haul.

    Best for
    Flat and low-slope roofs on many building types
    Install
    Fully adhered, fastened or ballasted
    Surface
    Black rubber, very few seams
    Lifespan
    30+ years, proven
    Full EPDM rubber roofing page
      Dark single-ply roof on a commercial buildingBlack membrane roof meeting a parapet wallWater beading up on a membrane surfaceTwo crew members inspecting a flat roof

      03 Modified bitumen roofing

      Modified bitumen: the torch-down workhorse.

      Modern asphalt roofing, engineered for flexibility and strength.

      Modified bitumen is the modern evolution of traditional asphalt roofing: asphalt blended with polymers (APP or SBS) so it stays flexible and strong.

      It is often torched down for a seamless, watertight bond, and can also go on with cold adhesives or as a self-adhering sheet. The multi-layer build stands up to punctures, tears and foot traffic.

      Available in a range of colors, including cool-roof options. A popular choice for flat and low-slope roofs, with a good balance of performance and cost.

      Best for
      Flat and low-slope roofs with foot traffic
      Install
      Torch-down, cold adhesive or self-adhering
      Surface
      Granulated cap sheet, colors available
      Strong at
      Punctures, tears, traffic
      Full Modified bitumen roofing page
        Crew rolling out a dark roofing membraneRoofer torching down a modified bitumen rollPropane torch heating a modified bitumen seamCrew on a freshly laid modified bitumen roof

        04 Hot mop roofing

        Hot mop: layers of hot asphalt, built to be redundant.

        The time-tested built-up roof, also called BUR.

        Hot mop, or built-up roofing, is a time-tested system for flat and low-slope roofs: multiple layers of hot, liquid asphalt mopped between sheets of reinforcing felt.

        The finished surface can be gravel or a reflective coating, which protects against UV and improves efficiency. It is known for exceptional strength and water resistance.

        The layered design adds redundancy, so your property stays protected even in harsh weather. It suits commercial and residential roofs alike.

        Best for
        Commercial and residential flat roofs
        Install
        Hot asphalt, ply by ply
        Surface
        Gravel or reflective coating
        Strong at
        Redundancy, water resistance
        Full Hot mop roofing page
          Crew mopping hot asphalt across a flat roofRoofers working beside an asphalt kettleModern home at duskOffice building roof at sunset

          05 Start here

          Know which roof you need? Or want us to tell you?

          Free estimate, in writing, no obligation.

          • Free estimates
          • Licensed & insured
          • No hidden fees
          Call nowFree estimate